6
MAN 9039267 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Installation in private areas
The installation must be carried out by a qualified professional!
If the fan is installed in an area that is not accessible to the public, it can be installed at
a lower height without the extra safety guard. However, it should be labelled with
hazard labels that warn of moving parts and indicate a safe distance of at least 65 cm.
In general
The fan is supplied assembled.
The fan must be fitted with an electrical panel that has an installed emergency stop,
which stops the fan’s movement by cutting off the power. The emergency stop button
must be of a type approved for that purpose.
The fan may only be used with the safety mesh guard.
Installation of the fan
The installation must be carried out by a qualified
professional!
If the fan is to be fitted in a metal structure, use
M8 bolts and insert them in the four holes in the
fan’s panels.
If the fan is to be installed in a brick structure, it must be
equipped with a metal frame with at least a 60 mm L-shaped
profile with a thickness of at least 5 mm and with suitable
clamps.
IMPORTANT! After fitting, it is important to check that the slats
can be opened and closed without any problems.
