P.Lindberg EF-105, Original Manual, Page: 94 / 106

14
MAN 9062965 EN V1
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 70212626 6600 Vejen, Denmark E-mail: salg@p-lindberg.dk
Adjustments
EXERCISE CAUTION!
Engage the parking brake, switch off the tractor, remove the ignition key and
disconnect the PTO before making any kind of adjustment.
Setting the mowing height
The mowing height depends on the
roller’s position. There are three
possible settings. From the factory, the
roller is mounted in the centre position.
If a lower or higher mowing height is
preferred, loosen the bolt (A) on both
sides of the flail mower. Detach the bolt
(B) on both sides of the flail mower.
Raise (or lower) and reattach the bolts
(B). Finally, tighten all the bolts.
Picture of a correctly adjusted roller,
and an incorrectly adjusted roller.
The skids are mounted in oval holes,
which enables them to also be raised or
lowered. Loosen the bolts (C), adjust the
skids and re-tighten the bolts. There are
skids on both sides of the flail mower.
C
A
B