7
MAN 9063195 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Fitting and Preparation
Nozzle selection and fitting
1.
The patio cleaner is supplied with a set of 25020 nozzles (25° and 2.0 hole) for rotary
cleaning and a 25025 nozzle for suction, so the equipment’s nominal flow is 6.5 (two
rotary nozzles x 2.0 o suction nozzle with 2.5 hole = 6.5) .
2.
Lowest operating pressure is 2,000 psi. The lower the pressure, the lower the suction.
3.
The nozzles must have a spray pattern of 15–25°: A spray pattern less than 15° can
damage the area that is to be cleaned. Anything greater than 25° will not cause the
arm to rotate.
4.
The nozzles must be screwed to the rotary arm and the nozzle hole must be parallel to
the arm:
Nozzle
Nozzle hole (parallel to the arm)
Rotary arm
Suction nozzle