7
MAN EL ATV 9056654_656 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 7021 2626
DK-6600 Vejen
E-mail: [email protected]
Assembly and preparation
Attaching the handlebar
1.
Place the handlebar in the holders
2.
Make sure that the handlebar is positioned parallel on the front wheel fork and
tighten the bolts using a 6 mm Allen key. Once the handlebar is correctly
positioned, it cannot be moved back or forth.
Inflating the tyres
The tyres are inflated from the factory, but they will unavoidably loose a little pressure
from the time they leave the factory until they are delivered.
Use a pump equipped with an auto valve and pump the front tyres to the pressure
specified on the tyre walls.
WARNING: Do not use the ATV until the tyres have been inflated to the correct
pressure. This could damage the ATV, whereby the warranty will cease.
