Please read these instructions carefully and store in a safe place
for future reference.
SATALITE
TM
As part of the Insect-O-Cutor
®
brand of insect control products,
Satalite
TM
a contemporary and highly effective decorative insect
control unit for use within front of house applications. Satalite
TM
utilises highly effective UV tubes and is designed for use with a
high specification glupac
®
glueboard. Two sizes of unit are
available, Satalite
TM
18 and Satalite
TM
30, both of which can be
mounted either horizontally or vertically.
CONTENTS OF PACKAGE
- 1 x Satalite flykiller
- 1 x Glupac
®
pheromone impregnated glueboard
- 2 x Screws and wall plugs
- 1 x Mains cable (Type X)
- 1 x Compact 18W tube (fitted)
or
- 2 x 15W High powered insect attractive UV tubes (fitted)
WARNING - THIS APPLIANCE MUST BE EARTHED (CLASS 1)
INSECT CONTROL PRODUCTS
Satalite
TM
utilises high powered ultra violet tubes to attract flying
insects and retains the caught insects on a pheromone
impregnated glueboard for inspection or hygienic disposal.
WARNING
Satalite
TM
is not to be used by children or persons with reduced
physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or
instruction.
Children should be supervised to ensure they do not play with
the appliance.
If the mains cable is damaged it must be replaced by a
specialist mains cable available from P+L Systems Ltd or your
supplier.
Not suitable for applications where potentially explosive environ-
ments may exist.
POSITIONING AND GUIDANCE FOR USE
THIS UNIT IS FOR INDOOR USE ONLY.
Satalite
TM
should ideally be fixed around two meters above the
ground, preferably in the darkest place within the area to be
protected. Do not position the unit close to windows, skylights or
other sources of light, or where it may be obscured by furniture,
doors or other obstacles. Ideally, Satalite
TM
should be visible from
every part of the area to be protected.
Satalite
TM
should ideally be in operation for 24 hours a day,
ensuring your premises are kept free of flying insects. Insects are
most attracted to Satalite
TM
units at night when there is no
competition from daylight or other light sources.
GUARANTEE
Satalite
TM
has a two year guarantee and if maintained as
recommended in these instructions should continue to work for
many years.* Use of non-approved consumables may invalidate
the guarantee. Ensure genuine glupac
®
glueboards are used in
conjunction with this product.
*Excludes tube(s), glueboard and starter(s). Does not cover breakdown due to misuse,
incorrect operation or use in an incorrect application.
Satalite 18 & 30
Front Guard Removal
Decorative Glueboard Insect Control
INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY SERVICE PERSONNEL
ONLY.
To ensure Satalite
TM
reaches you in perfect condition, a protective
film covers the aluminium backplate. Remove this film before
use.
Satalite
TM
should be mounted as shown in the mounting options
section of this document. Once installed in position, fit the
glupac
®
glueboard in position as described in the glueboard
replacement section of this document. Use the removable mains
lead and plug to connect the Satalite
TM
to an appropriate power
supply.
CLEANING
CLEANING SHOULD BE CARRIED OUT BY SERVICE PERSONNEL
ONLY, AFTER ENSURING THAT THE UNIT IS DISCONNECTED FROM
THE MAINS SUPPLY.
It is recommended that cleaning is carried out regularly when
the glueboard is replaced. Once the glueboard is removed, the
unit should be thoroughly wiped down with a damp cloth,
removing any build up of dirt. Ensure the unit is completely dry
before reconnecting it to the power supply.
MOUNTING FIXING CENTRES
METHOD
18
30
Wall
180mm 426mm
WALL MOUNTING OPTIONS
Horizontal
Vertical
2.
1.
