PL30 & PL60
Please read these instructions carefully and store in a safe
place for future reference.
PLUSLIGHT
™
As part of the P+L brand of insect control products,
PlusLight
™
is an effective and easily serviceable commercial flykiller
which utilises highly effective UV tubes and is designed for use
with a high specification glupac
™
glueboard. Two sizes of unit
are available,
PlusLight
™
30
which can be desk or wall
mounted and
PlusLight
™
60
which can be ceiling suspended.
Contents of package
- 1 x PlusLight
™
flykiller
- 1 x glupac
™
pheromone impregnated glueboard
- 2 x Screws and wall plugs (Pluslight
™
30 Only)
- 2 x Suspension keyrings and chain (Pluslight
™
60 Only)
- 1 x Mains cable
- 2 x High powered UV tubes (Fitted)
or
- 4 x High powered UV tubes (Fitted)
WARNING - THIS APPLIANCE MUST BE EARTHED
INSECT CONTROL PRODUCTS
PlusLight
™
utilises high powered ultra violet tubes to attract
flying insects and retains the caught insects on a pheromone
impregnated glueboard for inspection or hygienic disposal.
POSITIONING
THIS UNIT IS FOR INDOOR USE ONLY.
PlusLight
™
should ideally be fixed around two meters above
the ground, preferably in the darkest place within the area to
be protected and is supplied with a two meter mains lead.
Do not position the unit close to windows, skylights or other
sources of light, or where it may be obscured by furniture,
doors or other obstacles. Ideally,
PlusLight
™
units should be
visible from every part of the area to be protected.
INSTALLATION
PRIOR TO INSTALLATION, ENSURE THE POWER SUPPLY OF YOUR
MAINS OUTLET CORRESPONDS TO THAT MARKED ON THE
SPECIFICATION LABEL FOUND ON THE FLYKILLER.
PlusLight
™
should be mounted as shown in the mounting
options section of this document. Once installed in position,
fit the glupac
™
glueboard in position as described in the
glueboard replacement section of this document. Use the
removable mains lead and plug to connect the
PlusLight
™
to
an appropriate power supply.
WARNING - THIS APPLIANCE MUST BE EARTHED
USING PLUSLIGHT
™
PlusLight
™
should ideally be in operation for 24 hours a day,
ensuring your premises are kept free of flying insects. Insects
are most attracted to
PlusLight
™
units at night when there is no
competition from daylight or other light sources.
CLEANING
ENSURE THAT THE FLYING INSECT KILLER IS DISCONNECTED
FROM THE MAINS BEFORE CLEANING
It is recommended that cleaning is carried out regularly when
the glueboard is replaced. Once the glueboard is removed,
the unit should be thoroughly wiped down with a damp
cloth, removing any build up of dirt. Ensure the unit is
completely dry before reconnecting it to the power supply.
GUARANTEE
PlusLight
™
has a two year guarantee and if maintained as
recommended in these instructions should continue to work
for many years.* Use of non-approved consumables may
invalidate the guarantee. Ensure genuine glupac
™
glueboards are used in conjunction with this product.
*Excludes tubes, glueboards and starters. Does not cover breakdown due to misuse,
incorrect operation or use in an incorrect application.
MOUNTING FIXING CENTRES
Method
PL30
PL60
Wall
300mm -
Suspended
-
470mm
Commercial Glueboard Insect Control
Mounting Options
PlusLight
™
30 Wall
PlusLight
™
30 Desk
PlusLight
™
60
Suspended
