P.I.T. GCS45-D1, User Manual

Page: 6 / 22

5
GASOLINE CHAIN SAW
RULES OF OPERATION
In the following situations, you must immediately turn off the tool.
1. When the saw chain touches another object (it is necessary to inspect the damage before restarting)
2. During operation, there were extraneous noise and unusual vibration (it is necessary to inspect and
troubleshoot)
3. The operator leaves the work place of the gasoline chain saw
4. if a tree trunk or log shift is detected
5. During crosscutting
Persons not allowed to work with gasoline chain saw
1. Minors and older persons
2. Persons with poor health and people with disabilities
3. Persons under influence of alcohol and narcotic drugs
Before operating, pay attention to the following points:
1. During operation it is necessary to be in safe footwear and overalls (union suit, working clothes)
2. Carefully inspect the degree of wear of gasoline chain saw, chain, guide tire component, the tension
degree of the chain, if necessary adjust or replace
3. Check the operation of the on/off control
4. Completely inspect the work place: remove stones, metal objects, brush woods and other wastes
5. Before starting operation, determine the path of safe departure from work to a safe area
During operation:
1. The work is not allowed if the distance from the trunk to the conveyor is less than 1.5 meters
3. Before the crosscutting, first run the gasoline chain saw and work for 1 minute, to check the stroke
4. During start-up and operation, hands and feet should not be located near rotating mechanisms,
especially from below and above the chain
5. Keep the gasoline chain saw under both hands
6. During work stand stable, it is forbidden to work standing under a tree trunk or log, as well as on a
log
7. Eliminating the saw jamming must pay special attention to the safety of helping people
8. During operation, it is necessary to lubricate and cool the saw in a timely manner
9. Before the log is sawn off, pay attention to the direction of movement of the cut piece, after complet -
ing sawing, quickly raise the saw
In the following situations, do not operate the gasoline chain saw:
1. Proximity of people
2. Until the person who helped with the crosscutting has gone to the safe zone
3. In the working area, where the tree trunks are folded into unstable piles
4. Insufficient lighting
5. In open areas during rainy days
6. With a wind that a force greater than 5 balls
7. During a thunderstorm
8. Without the protective mechanism of an open chain, without a protective mechanism against shocks
or in case of malfunction of these mechanisms.
After operation completion:
Every day after work, it is necessary to check all nuts, bolts, screws, inspect the degree of wear of the
saw blade, guide tire component, sprocket. If necessary, adjust and replace.
Before long-term storage, it is necessary to clean residues of wood and dirt, remove the chain and
guide tire component, lubricate with anti-corrosion oil. Drain the fuel flow mixture. Store in a dry place.