1. Fit the required inflation adaptor
onto the tool.
2. Insert the nozzle into the valve of the
inflatable item.
3. Switch the inflator on.
4. Once the item is suitably inflated, switch the tool off and remove the
adaptor from the valve.
WARNING!
ENSURE THE DEFLATION PORT AND AIR
VENTS ARE NOT OBSTRUCTED, OTHERWISE THE
UNIT COULD OVERHEAT.
5. To deflate objects, fit the required
adaptor onto the deflation port
and then proceed with steps 2
& 3.
4. INFLATING & DEFLATING ITEMS
5. TROUBLESHOOTING
WARNING!
AVOID INFLATING OBJECTS ABOVE THE
RECOMMENDED INFLATION PRESSURE. THIS MAY
LEAD TO DAMAGE AND/OR INJURIES.
PXHVIS-018
Symptom
Possible Cause
Solution
The inflator does
not start
No power supply
Check that the battery
is charged.
On/off switch not in the on
position
Push the on/off trigger
Nozzles disconnect
when the tool
switches on
Loose inflation adaptor
Ensure that the
inflation adaptor is
locked onto the air port
of the tool
Tool is operating
but the inflatable
item is not inflating
Some inflatable items have
a check valve that require
pinching or unscrewing
Pinch or unscrew the
item’s check valve
while operating the
tool
Tool is overheating
While inflating, the intake
fan or vents are being
obstructed, restricting air
flow to the tool
Ensure the intake fan
and vents are free of
any obstructions
