The room sensor and power cable must be connected to the rear heaters, in the right-hand side of the stove.
Drawing 8
5.
CLEANING AND MAINTENANCE.
To ensure the correct operation of your stove, the following Cleaning and maintenance operations are
necessary at the indicated frequency. The stove must always be cold.
The deterioration of the stove parts by a lack of cleaning involves the loss of the two-year warranty offered
by
OZ Energia
(see warranty section).
DAILY CLEANING WHEN THE STOVE IS COLD
5.1.
Heat Exchanger
Pull the drawers of the rake-this shall be done while the glass door closed in order to reach the ash inside the
stove. This shall be done
every day
when the stove is cold.
Drawing 9
A greater weekly cleaning must be made on the heat exchanger (
), for the
5,5kW
and
7kW
model. To gain
better access to the exchanger and clean it perfectly, you have to push up the top plate of the fireplace (
),
to disengage the tabs which secure it to the center plate and pull it. When finished, put back the top plate
being sure that the tabs are properly seated.
Drawing 10
Keyboard
Keyboard support
Wifi antenna connection
Power connection
~
230/240V - 50Hz
Thermostat connectio
Thermostat
Top plate of the fireplace
Heat exchanger
27