Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4566
1) Firstly, attach one of the stand assembly (No.5) to one end of the handle
(No.1). Ensure the holes align and then secure using a screw, washer and nut
(No. 2, 3, 4). Repeat this on the other side of the handle. Please see image on
previous page to help.
2) Now take one of the bobbins frames (left (No.12) or right (No.9) and slide a
spring and a washer (No.10, 11) onto it. Ensuring these are on the inside, push
the cylinder end through the holes at the top of the stand assembly (No.5) and
secure in place using an R pin (No.8). Repeat on the other side with the
remaining bobbin. Please see image on previous page to help.
