Page 45
Troubleshooting
Most problems can be solved by switching the device off and on
again. If your problem cannot be rectified using the below advice,
please contact your OXSIGHT Care Team for assistance.
Onyx will not switch on
•
Check that the device is fully charged.
•
If the battery is at less than 5% charge, the Right LED will flash red.
•
If the battery is fully discharged, then the LEDs will not light up. See
page 20.
•
If the device has been in use it may have overheated and switched
off. Allow the device to cool down before attempting to switch
back on.
The image on the screen appears jerky
•
The device may have overheated due to prolonged use. Power
off and allow the device to cool down before attempting to switch
back on again.
Summary of Contents for Onyx
