OXSIGHT Onyx Page 54 User Manual Download | Manualshive

Page: 54 / 60

background image

Page 52

Intellectual property rights

OXSIGHT Onyx™ is a registered trademark of OXSIGHT Ltd. The customer
recognises and agrees that all rights, intellectual property and trademarks
in relation to this device are the property of OXSIGHT Ltd., whether
registered or not.

Under the terms and conditions of the sale the customer is granted
nonexclusive and non-transferable license to use the software embedded
in this device, for personal use only, with the exception of open source
components licensed under LGPLv2 and GPLv2, for which license text,
original source code and modifications are available by contacting
OXSIGHT Ltd on

[email protected]

The customer must not make any hardware or proprietary software
changes or interfere with the device. The customer must not delete or make
changes to the proprietary software components embedded in this device.
The customer must not disassemble or reverse engineer any aspect of the
device. Any attempt to do so will be deemed in breach of the terms and
conditions.

OXSIGHT will provide periodic updates to the software and make these
available to an authorized OXSIGHT representative to be installed on the
device.

«
...
52
53
54
55
56
...
»

Summary of Contents for Onyx





























































Reviews:

No comments

Related manuals for Onyx

Brand: MAD Gaze Pages: 92

Brand: Zeiss Pages: 22

Brand: Wiley x Pages: 2

Brand: Wiley x Pages: 2

Brand: Samsung Pages: 154

Brand: Samsung Pages: 29

Brand: Samsung Pages: 183

Brand: Samsung Pages: 678

Brand: Samsung Pages: 63

Brand: Samsung Pages: 47

Brand: Samsung Pages: 723

Brand: Samsung Pages: 64

Brand: Linsar Pages: 48

Brand: LG Pages: 322

Brand: Technika Pages: 32

Sunglasses Camera

Brand: Epcom Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands