Praktika T-04(K) speedgate
34
6.5.6.
Fix the bracket to clips (7, fig. 16) using the M4 screws
(8, Fig. 16). It is recommended to install a reader at an angle of 40 ... 50º to
guiding bars for cards (Fig. 17). In this case, the guest and permanent card
will be read equally well.
6.5.7.
Put the cable of reader in the housing of the card collector.
6.5.8.
CAREFULLY (!) set the LED panel in its original
position. Tighten the M4 screw.
CAUTION! When installing the LED panel in its original position, make
sure that wires of optical sensors mounted on the guiding bars for cards
will not be damaged by other elements.
