Oxgard Praktika K-01, Operational Manual

Page: 12 / 19

Praktika K-01 card collector 12
Fig. 2. Layout of board
7.3. Removing guest cards from card reader
7.3.1. Open the hatch lock of card collector with a key (Fig. 1).
7.3.2. Put a bag to collect cards (not supplied) underneath storage
device.
7.3.3. Gently lift the storage curtains to remove the cards.
7.3.4. Lower the storage curtains and close the door with a key.
7.4. Inversion of LED panel board
In some cases, for correct display modes of the card reader, you need
to invert the board indicating by 180º depending on the installation site.
Inversion is made according to the Installation guidelines (section 6).