Version 1.4 rev 23 Apr 2019
25
IKon-L
SECTION 4: OPERATION
WARNINGS:
• IF THE EQUIPMENT IS USED IN A MANNER NOT SPECIFIED BY ANDOR OR ITS DISTRIBUTORS, THE
PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPAIRED.
• PLEASE READ THE USER GUIDES SUPPLIED WITH YOUR SYSTEM COMPONENTS AND CAMERA CONTROL
SOFTWARE PRIOR TO USE.
4.1 e
MeRgency
M
ains
d
isconnection
In case of emergency, the disconnecting point of the equipment is the mains power cord connected to the external
power supply, or the mains socket switch.
WARNING: SWITCH OFF THE POWER AT THE MAINS SOCKET AND REMOVE THE MAINS LEAD FROM THE
EXTERNAL POWER SUPPLY.
4.2 p
oWeR
-
Up
s
eqUence
1. Ensure that the iKon-L is powered on at the mains power supply (Note there is also a power switch on the PS-40).
2. Ensure that the USB 2.0 cable is connected between the camera and the PC.
3. Start up the PC.
4. Launch your camera control software e.g. Solis or SDK2.
5. The camera will now start up under control of the software and you are ready to use the camera.
6. Refer to your software manual for set-up and image acquisition information.
4.3 p
oWeR
-d
oWn
s
eqUence
1. Exit the camera control software.
2. The camera will automatically turn off.
3. Switch off power to the camera and if not using for some time, disconnect from the mains power socket.