2
OVERVIEW
SAFETY INFORMATION
Do note remove or replace the top cover with
the engine running.
Hot parts
!
DANGER
During and after operation, engine parts
could be hot enough to cause burns. Do not
touch any parts under the top cover until the
engine has cooled off.
Electric parts
!
DANGER
Do not touch any electrical parts while
starting the engine. They can cause shock or
electrocution.
Engine shut-off switch and cord
!
DANGER
The purpose of a lanyard stop switch is to
stop the engine when the operator moves far
enough away from the operator’s position to
activate the switch.
Attach the engine shut-off cord so that the
engine stops if the operator falls overboard
or leaves the helm.
When activating the engine shut-off switch
the engine will stop immediately, but the
boat will continue to coast for some distance
depending on velocity and degree of any turn
at shut down.
Safety and operating information that is
practiced, along with good common sense,
can help prevent personal injury and product
damage.
Symbols and signs
!
DANGER
This indicates a hazardous situation which,
if not avoided, will result in death or serious
injury.
!
WARNING
This indicates a hazardous situation which, if
not avoided, could result in death or serious
injury.
!
CAUTION
This indicates a hazardous situation which,
if not avoided, could result in minor or
moderate injury.
NOTE!
Important information
Rotating parts
!
DANGER
Rotating parts can cause cuts, mutilation or
strangulation.
Hands, feet, hair, jewelry, clothing, PFD-
straps, etc. can become entangled with
internal rotating parts of the engine or
exposed moving parts.
Summary of Contents for OXE-200 HP
