OXE OXE-150 HP, Installation Manual

Page: 66 / 68

66
OXE 150/200 HP INSTALLATION MANUAL
ELECTRIC POWER CABLE CONNECTION PROCESS
1.
Install a main electric power switch on the (B+) side ( See specifications of
length between battery and switch )
From the main electric power switch:
2.
Install a separate (B+) power supply cable to the starter motor
(See layout and specifications of the cables in the picture below).
3.
Install a separate (B+) to the fuse box.
(See layout and specifications of the cables in the picture below) .
4.
Prior to installing the ground cable – ensure that the main electric power
switch is disengaged (OFF and ignition key is in the OFF-position.
5.
Install the ground cable to the specified torque on the alternator bracket and
then install the other end to the battery (B-) Ground. Connect a common
ground cable (wire size same as engine battery cables) between negative (–)
terminals on starting batteries.