OXE OXE-150 HP, Installation Manual

Page: 34 / 68

34
OXE 150/200 HP INSTALLATION MANUAL
ELECTRICAL SYSTEM
WIRING
When installing the helm harness built for the OXE-diesel it is important not to
connect any peripheral devices to the OXE Diesel Engine CAN system.
Any peripheral equipment should be connected to a seperate CAN system.
Connecting any peripheral equipment to the helm harness (OXE Diesel Engine
CAN will void the warranty.
NMEA2000, 1A (F101)
This fuse will not be pre-mounted on, but supplied with, the Helm Harness.
The ”NMEA2000, 1A” fuse is powering the NMEA2000 ignition power supply in a
single engine configuration.
SINGLE ENGINE CONFIGURATION:
“NMEA2000, 1A” fuse connected, no external power supply to the NMEA2000 bus
allowed.
Or
“NMEA2000, 1A” fuse disconnected, external power supply to the NMEA2000 bus
needed, e.g. consumer battery or equivalent that has the same ground as the
engine.
WIRING