OXE OXE-150 HP, Installation Manual

Page: 18 / 68

18
OXE 150/200 HP INSTALLATION MANUAL
MOUNTING THE OUTBOARD
1.
Determine boat transom center line
Take the measurements
a, b, c and d. Measurements a and b should be similar and so should
measurements c and d be.
Note! Recheck the measurements and verify that the transom centerline position is straight!
Fig. 5
Centerline measurements
Dual outboard installation
Mount both outboards so that the distance of each outboard centerline to the transom centerline is the same
on both sides, i.e. measurements (e) and (f) should be the same. Ensure to maintain a minimum distance (a)
between both vertical centerlines of the outboards.
!
CAUTION
- Ensure that distance e and f are similar
- T1 must be the same as e plus f and no less than the minimum distance a. Check dimensions.
Fig. 6 Transom centerline - dual installation