OXE OXE-150 HP, Installation Manual

Page: 16 / 68

16
OXE 150/200 HP INSTALLATION MANUAL
MOUNTING THE OUTBOARD
MOUNTING THE OUTBOARD
!
WARNING
Overpowering a boat may cause severe instability. Never install an outboard that exceeds the maximum
boat horsepower rating capacity. Always check with your dealer!
Improper mounting of the outboard could result in hazadous conditions, such as poor handling, loss of
controlor fire hazards. Only autherised personell should mount the OXE Outboard.
Fig. 3 Outboard mounting height (H)
Minimum height between water surface and bracket seating point
Model Min. height (H)
OXE Diesel P2 - 200 150 mm 5.9 in
Under mooring of boat with a maximum boat load, maintain the minimum alowable height (H) shown in the
illustration between the water surface and the clamp bracket seating point. Remember to check and adjust the
height if you change CG or increase maximum boat load.