33
4.
Open connection
(4)
and fill
with coolant fluid of sufficient
grade temperature-wise until
it exits from connection
(1)
.
5.
Undo the hose on the seawater
pump
(3)
and drain the
seawater.
An alternative solution is to run the
outboard with the water-intake point
in the front of the lower housing
lowered into a coolant fluid mixture
of sufficient grade.
Run the outboard until the entire
sea-water part of the system is filled
with coolant fluid and thus protected
from freezing and corrosion.
Another alternative is to connect
a rubber hose
(2)
to the seawater
strainer connector
(1)
. Insert
the other end of the hose into a
container filled with cooling fluid
mixture. Run the outboard until
the entire sea-water part of the
system is filled with coolant fluid and
thus protected from freezing and
corrosion.
Te
ch
ni
ca
l d
at
a
M
ai
nt
ena
nc
e
O
per
at
in
g
O
ve
rv
ie
w
