WWW.OXAUSA.COM
b. Turn on the speaker using the
On/Off switch
located on the bottom of the speaker. You should see two Blue
LEDs on the bottom of the Speaker illuminate and begin flashing. You will also hear a loud double tone.
c. Press and hold down the
Mode Button [3]
until the Blue LEDs stop flashing and remain illuminated.
6) To answer an incoming call and use the hands-free feature, follow these steps:
a. When the Speaker receives an incoming call you will hear your mobile device ringtone and the Blue LEDs will
flash until you answer the call.
b. To answer an incoming call, press the
Phone Button [1]
one time.
c. You can decrease the volume by pressing and holding
Button [2]
or increase the volume by pressing and
holding
Button [4]
.
d. To reject an incoming call, press the
Phone Button [1]
two times.
e. To end a call, press the
Phone Button [1]
one time.
4. Accessories
30cm cable (USB to Micro USB)
3.5mm male to male Aux-in Cable
A USB AC adapter plug is
not included
so you will need to purchase it separately or you can use the USB AC
adapter plug that came with your mobile device.
5. Caring for your Speaker
This device has a built-in rechargeable/replaceable battery that is charged by using the USB cable (provided).
Please ensure that the product is fully charged before you use it for the first time.
Please do not use a corrosive cleaner, immerse in water or place near high heat.
Please handle the device carefully in order to avoid damage to the internal circuitry.
Please do not attempt to disassemble your unit.
6. Troubleshooting
If you lose the Bluetooth connection while still within range it may be a low battery condition.
If the Speaker starts to operate intermittently then this may be a low battery condition.
If you do not hear any sound please check the volume control which may be set too low.