5.Panel Operation
25
next page, and press the
Order
softkey, the
Order
menu item is highlighted. In
Parameter 5
of Figure 5-10, a blinking cursor appears in the parameter value of order.
Turn the
knob
to change the value directly, or use the
numeric keypad
to input the
desired value, which can be set from 2 to 16.
Set the harmonic amplitude of each order
After entering the harmonic setting menu, press the
NextPage
softkey to enter the
next page.
(1)
Select the sequence number of the harmonic
: Press the
SN
softkey, the
SN
menu item is highlighted. In
Parameter 6
of Figure 5-10, a blinking cursor
appears in the parameter value of SN. Turn the
knob
to change the value directly,
or use the
numeric keypad
to input the desired value.
(2)
Set the amplitude of the selected SN
: Press the
Amplitude
softkey, the
Amplitude
menu item is highlighted. In
Parameter 7
of Figure 5-10, a blinking
cursor appears in the parameter value of Amplitude. Turn the
knob
to change
the value directly, or use the
numeric keypad
to input the desired value and
choose the unit.
Set the harmonic phase of each order
After entering the harmonic setting menu, press the
NextPage
softkey to enter the
next page.
(1)
Select the sequence number of the harmonic
: Press the
SN
softkey, the
SN
menu item is highlighted. In
Parameter 6
of Figure 5-10, a blinking cursor
appears in the parameter value of SN. Turn the
knob
to change the value directly,
or use the
numeric keypad
to input the desired value.
(2)
Set the phase for the selected SN
: Press the
Phase
softkey, the
Phase
menu item
is highlighted. In
Parameter 8
of Figure 5-10, a blinking cursor appears in the
parameter value of Phase. Turn the
knob
to change the value directly, or use the
numeric keypad
to input the desired value and choose the unit.
Output the Modulated Waves
Supported modulation types include: AM (Amplitude Modulation), FM (Frequency
Modulation), PM (Phase Modulation), PWM (Pulse Width Modulation), ASK
(Amplitude Shift Keying), PSK (Phase Shift Keying), FSK (Frequency Shift Keying), 3FSK
(Ternary Frequency Shift Keying), 4FSK (Quadrature Frequency Shift Keying), BPSK
(Biphase Phase Shift Keying), QPSK (Quadrature Phase Shift Keying), OSK (Oscillating
Keying), SUM (Sum Modulation), DSB-AM (Double-Sideband Amplitude Modulation).
Press the
Mod
function key, then press the
Type
softkey, turn the
knob
to select the
modulation type, press the
OK
softkey to enter the setup menu. To turn off the
modulation, press the
Mod
function button again.
