5.Panel Operation
18
The arbitrary wave menu includes:
Frequency/Period
,
Amplitude/High Level
,
Offset/Low Level
,
Start Phase,
and
Built-in Waveform
.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, Start Phase,
please refer to
on page 10.
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.
Figure 5-9: Arbitrary wave user interface
Select build-in wave
(including DC)
There are 152 types of waveforms built in the generator, the number of waveform
points is 8192 points, and the highest upper limit frequency is 15MHz. To select a
built-in waveform, the steps are as follows:
(1)
Press the
Arb
wave button, then press the
Built-in
softkey to enter the
built-in wave menu.
(2)
Press
Common
,
Medical treatment
,
Standard
,
Maths
softkeys to select the
built-in wave type.
Press
NextPage
softkey to enter the next page, select the built-in wave type:
Trigonometric
,
Window function
,
Engineering
, and
Seg Mod
(Segmentation
Modulation).
Press
NextPage
softkey to enter the next page, select the built-in wave type
Fan
test
.
For example, select
Common
to enter the interface shown below.
