background image

 

General Warranty

 

OWON warrants that the product will be free from defects in materials and workmanship for a period 
of 3 years (1 year for accessories) from the date of purchase of the product by the original purchaser 
from the OWON Company. This warranty only applies to the original purchaser and is not transferable 
to the third party. 

 

If the product proves defective during the warranty period, OWON either will repair the defective 
product without charge for parts and labor, or will provide a replacement in exchange for the defective 
product. Parts, modules and replacement products used by OWON for warranty work may be new or 
reconditioned like new performance. All replaced parts, modules and products become the property of 
OWON. 

 

In order to obtain service under this warranty, customer must notify OWON of the defect before the 
expiration of the warranty period. Customer shall be responsible for packaging and shipping the 
defective product to the service center designated by OWON, and with a copy of customer proof of 
purchase. 

 

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or 
inadequate maintenance and care. OWON shall not be obligated to furnish service under this warranty 
a) to repair damage resulting from attempts by personnel other than OWON representatives to install, 
repair or service the product; b) to repair damage resulting from improper use or connection to 
incompatible equipment; c) to repair any damage or malfunction caused by the use of non-OWON 
supplies; or d) to service a product that has been modified or integrated with other products when the 
effect of such modification or integration increases the time or difficulty of servicing the product. 

 

Please contact the nearest OWON's Sales and Service Offices for services. 

 

For better after-sales service, please visit 

www.owon.com.cn 

and register the purchased product online. 

 

Excepting the after-sales services provided in this summary or the applicable warranty 
statements, OWON will not offer any guarantee for maintenance definitely declared or hinted, 
including but not limited to the implied guarantee for marketability and special-purpose 
acceptability. OWON should not take any responsibilities for any indirect, special or consequent 
damages. 

 

For more details, please refer to the user manual on the supplied CD, it can also be downloaded at 

www.owon.com.cn 

 

Summary of Contents for XDG2000 Series

























Reviews: