Owon Waveform Generator, Manual

Page: 13 / 16

6. Quick Start
11
Parameters as Burst Period, Start Phase, Cycles/Infinite and Source are allowed to be set
in N-Cycle mode; while Start Phase and Polarity are available in Gated mode.
To Manage File
Press
Save
function button to enter the file system. You can view the waveform files,
create a new folder, and perform the file operations such as delete, rename, copy and
paste.
To Edit the File Name
In file system, the user can edit the name of a file or a folder. When the system needs the
user to input a name, an input keyboard will appear.
(1)
Turn the
knob
or press / direction key to move the cursor left and right in the
keyboard. Press
F3
to switch between capital and small of the characters.
(2)
Press
F1
to enter the current character. Press
F2
to delete the last character .
(3)
Press
F4
to finish editing and save the file. Press
F5
to cancel the save
operation.
Note : The length of file name is up to 15 characters.
To Set the Utility Function
Press
Utility
function key to enter the Utility Menu. You can set the parameters of the
Generator such as: Display Parameter, Counter Parameter (only for the model with "F"),
Output Parameter and System Setting. Press
Utility
again to exit the Utility Menu.
Utility Menu items
Menu Item Explanations
Display Setup
Bright Set the parameter of LCD brightness.
Separator Set the separator of the displayed parameter.
Screen Saver Time range is 1 - 999 minutes.
Counter (Only for the model with "F")
Freq/Period View the measure result of frequency or period.
PWidth/Duty View the measure result of positive width or duty.
Set Enter measurement setting menu.
Output Setup
Load
Used to match the displayed voltage with the expected
load. The load range is 1 Ω - 10 KΩ.
System