4.Advanced User Guidebook
53
Using the LAN port or Wi-Fi, the oscilloscope can be connected with a
computer. The oscilloscope also supports communications with Android based
smart device via Wi-Fi. Refer to "
Communication with Android Device via Wi-Fi (Optional
operation steps.
●
Update
Use the side panel USB port to update your instrument firmware using a USB
memory device. Refer to "
Update your Instrument Firmware
Set the Display System
Click
to call up the menu panel. Click the
Display
softkey on panel, the
Display menu is shown as follows:
Persist
When the
Persist
function is used, the persistence display effect of the picture
tube oscilloscope can be simulated. The reserved original data is displayed in
fade color and the new data is in bright color.
(1) Click
to call up the menu panel. Click the
Display
softkey on panel.
(2) Select
Persist&Color
in the bottom menu.
(3) Select
Persist
in the right menu.
(4) In the Time menu, select the persist time, including
OFF
,
1 Second
,
2
Function
Menu
Setting
Description
Type
Dots
Vect
Only the sampling points are displayed.
The space between the adjacent sampling points
in the display is filled with the vector form.
Persist
&Color
Persist
OFF
1 Second
2 Seconds
5 Seconds
Infinity
Set the persistence time
Color
ON
OFF
Turn on/off the color temperature function
Counter
ON
OFF
Turn on/off counter
Clear
Erase the results of previous acquisitions from
the display. The oscilloscope will start to
accumulate acquisitions again.
Summary of Contents for TAO3000 Dual-Channel Series
Page 1: ...TAO3000 Dual Channel Series Tablet Oscilloscopes User Manual www owon com ...
Page 93: ...4 Advanced User Guidebook 87 Figure 4 24 Hamming window Figure 4 25 Rectangle window ...
Page 94: ...4 Advanced User Guidebook 88 Figure 4 26 Blackman window Figure 4 27 Hanning window ...
Page 95: ...4 Advanced User Guidebook 89 Figure 4 28 Kaiser window Figure 4 29 Bartlett window ...
