3.Quick Start
6
Control Area
6
1
2
3
5
4
Figure 3-3 Control Area Overview
1. Function button area
: Total 6 buttons.
2. Horizontal control area
with 1 button and 2 knobs.
"HOR" button refer to horizontal system setting menu, "Horizontal Position"
knob control trigger position, "
Horizontal Scale" control time base.
3. Trigger control area
with 2 buttons and 1 knob.
The Trigger Level knob is to adjust trigger voltage. Other 2 buttons refer to
trigger system setting.
4. Copy button
: This button is the shortcut for
Save
function in the
Utility
function
menu. Pressing this button is equal to the
Save
option in the Save menu. The
waveform, configure or the display screen could be saved according to the
chosen type in the Save menu.
5. Vertical control area
with 5 buttons and 2 knobs.
CH1
-
CH4
buttons correspond to setting menu in CH1 - CH4. "
Math
" button
provides access to math waveform functions (+, -, ×, /, FFT). The "
Vertical
Position
" knob control the vertical position of current channel, and the
"
Vertical Scale
" knob control voltage scale of current channel.
6. M
knob(Multipurpose knob): when a
symbol appears in the menu, it
indicates you can turn the
M
knob to select the menu or set the value. You can
push it to close the menu on the left and right.
