Owon AG1012F, User Manual

Page: 16 / 53

5.Front Panel Operation
11
To set channels

To Switch Channels for Display
Press
CH1/2
button to switch channel displayed on the screen between CH1 and CH2.

To Display/Edit Both Channels
Press
Both
button to display the parameters of both channels.
To switch channe
l: Press
CH1/2
to switch the editable channel.
To select waveform : Press Waveform selection buttons to select waveform of current
channel.
To select parameter : Press
F2
-
F5
to choose the Parameter 1 to Parameter 4 ;
Press it again to switch the current parameter such as Frequency/Period.
To edit parameter : Turn the knob to change the value of cursor position. Press /
direction key to move the cursor. (The number keys can not be used to input.)
CH1 Waveform
Parameter 1
Parameter 4
CH2 Waveform
Parameter 1
Parameter 2
Parameter 3
Parameter 2
Parameter 3
Figure 5-1: The User Interface of
Both
button

To Turn On/Off Output of Channels
Press
CH1
or
CH2
to turn on/off output of the corresponding channel. The indicator will
be lighted when the corresponding channel is tuned on.

Channel Copy
(1)
In signal output interface, press the
knob
on the front panel to enter Channel Copy
menu.
(2)
Press
F1
to select From CH2 To CH1, or press
F2
to select From CH1 To CH2.