GlaStep Box Boards
2014 Chevy/GMC FS PU
8ft Bed
–
3205
Owens Products Inc
.
1107 Progress Street
Sturgis, MI 49091
269-651-2300
Toll-Free:800-726-9367
Fax: 269-651-9326
www.owensproducts.com
1)
2)
Hardware included shown on right.
There are extra components in the
bolt pack
Tools required:
1/2” socket
1/2” wrench
3/8” nut driver
Drill
4)
3)
Page 1
Cut trim lock to 9-3/4” and attach to FL180D & P as
shown in
Fig 3.
In front of rear wheel, above front leaf spring
shackle, on the bed cross member, attach clip nut and
8mm pull nut, as shown in
Fig. 4.
Attach trim lock
here
Locate the front bed cross member. Remove the
two OEM bolts with a 13mm and 18mm wrench
.
Place a FL254 over the holes the bolts were re-
moved from and replace the bolts as shown in the
image above.
3124F
FL180D/P
FL254
5/16” bolt (for clip nut) or
8mm bolt (for pull nut)
8mm bolt
Install FL180D & P using 5/16” flanged bolt (for
clip nut only) and 8mm bolt and washers, as in
Fig. 5.
Note: No Drilling into the vehicle is Required
