Owandy Radiology i-max touch 3D, User Manual

Page: 25 / 119

User Manual
– Safety information
NIMXEN020I
Owandy Radiology SAS 15
3.4 Cybersecurity measures
Like all computer-based systems, I-MAX 3D might be exposed to Cybersecurity threats.
I-MAX 3D is equipped with hardware provisions that make sure that no unwanted X-ray exposure,
laser radiation or motorized movements can be activated even in case of cyber-attack or software
failure.
Nevertheless, in order to minimize the possibility of cyber-attacks, it is user responsibility to make
sure that the following protection measures are followed.
•
The initial software installation and system set-up shall be done by authorized and trained
personnel only and using the software provided with the machine
•
Any software or firmware upgrade of the equipment shall be done by authorized and
trained personnel only
•
After any software or firmware upgrade, or any other maintenance operation, image
quality checks shall be performed to ensure the system is working as expected.
Instructions are given in chapter 8
•
Password-protect each user account on the Windows login. Passwords shall be strong
enough (at least made of 8 alphanumeric characters), shall be safely managed by every
user (for example they have not been written down), and should be periodically changed
(if the system is supplied with a PC, the Windows user is password-protected, but it is
user responsibility to change the default password and set new ones for all the different
users that will have access to the system)
•
Activate a screensaver that requires a password to be unblocked after a timeout of 5-10
minute, giving this way an automatic timed method to terminate sessions, preventing an
unauthorized access to the computer when it is not used (if the system is supplied with a
PC, the screen saver is activated by default)
•
Install an antivirus software and keep virus definitions up to date
•
Activate the windows firewall on the host PC (if the system is supplied with a PC, the
Windows firewall is activated by default)
•
It is recommended to activate a hardware firewall on the WAN router/modem used for
internet connection, if present
•
Make sure that all other PCs in the network are protected by an anti-virus
•
Make a virus scan of USB sticks or CD/DVD media before using them to check they are
free from viruses, malware or any dangerous software
•
Avoid installation of an unknown or untrusted software since it may undermine
performance and safety of the computer and the equipment
•
Keep the Windows operating system up to date by installing all security patches
•
Make regular copies (backup) of all your valuable data and store them in a safe place,
separately from the host PC