OVIDE SMART DOCK
SET UP
Your Ovide Smart Dock is a light-weight portable solution to use your own Apple Mac computer to run QTAKE software.
There are a few steps you must follow before you can start working:
STEP
1
STEP
3
STEP
4
STEP
5
STEP
6
1.1 Using a web browser, go to
www.ovidesmart.com/downloads-dock/
(or use the files stored in the video SSD drive)
1.2 Download and install QTAKE software (HDx2)
1.3 Download and install Deltacast drivers
1.4 Download and install Sentinel drivers
1.5 Restart your computer
Install your USB license dongle (if you have it) following the instructions in the back of this page.
Power the Ovide Smart Dock with a battery or an external power source (18 to 30v) using the Fischer connector.
Unzip your QTAKE license file (.lic) to the license folder (usually is: /Applications/QTAKE/License)
Run QTAKE
STEP
2
Connect the provided USB-C* cable between
the port in the back labeled “COMPUTER”
and any of your Mac’s Thunderbolt3 ports.
This cable will provide power (including charge), video and audio inputs and outputs, as well as disk drive and other USB communications and
Ethernet.
*Don’t use a Thunderbolt3 cable, only use USBC cables. Make sure it is a 40Gbps USBC cable so that enough bandwidth is available, and that
it is at least 85W capable if you want to power supply and charge your Macbook through Smart Dock.
