10400788-001 11/2017
©2016-17 Overland Storage
Page 1 of 4
*10400788-001*
SnapServer
®
XSR40
Add-on/Spare DIMM Instructions
This document describes how to add a DIMM to or replace an
existing DIMM in an Overland-Tandberg SnapServer XSR40.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working with
the unit.
WARNUNG:
Um das Risiko eines elektrischen Schlags oder
Schäden am Gerät zu vermeiden, ziehen Sie stets den
Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT:
Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage
to micro-circuitry or static-sensitive devices.
IMPORTANT: Using DIMMs that are not supplied by
Overland Storage will void your warranty. Overland
Storage DIMMs have been tested and verified to operate
properly with Overland appliances. Failure to use qualified
DIMMs may impact data availably or lead to data loss.
Register a New DIMM
NOTE: If you are only replacing an existing DIMM card, skip ahead
to the next section,
It is
essential
that the product be registered because technical
and warranty support is
not available
until then.
For an existing customer:
1.
Go to
http://support.overlandstorage.com/
2.
Enter your
e-mail address
and
password
, and then
press
Enter
or click the right arrow (
>
).
3.
At the Support Home page, click
Register New
.
4.
Enter the requested information and click
Submit
.
Your warranty certificate will be emailed to you. Follow
the instructions in the email to complete the process.
For a new customer, go to the
and follow the instructions.
Existing User Login
New User Registration
Prepare the Unit
Power Off and Disconnect
If the unit is still running, power it down cleanly:
1.
Use the Web Management Interface to power off the unit
(
Maintenance > Shutdown/Restart > Shutdown
).
2.
When all the LEDs are off, disconnect the
power cords
.
3.
Disconnect the remaining
cables
from the unit, noting
their locations.
Enter
Enter
Enter
All Fields
Power Socket
Data Cables
