Overland Tandberg NEO S 1U, Service Manual

Page: 45 / 51

NEO S-Series Library Service Manual Event Codes and Acronyms
10400666-005 ©2015-20 Overland-Tandberg

45
Sub-error Codes Related to the Library
73 Error during move sled to block
80 Opening mail slot failed
81 Error during movement to mail slot open position
82 Error during moving back - sensor was found
90 Movement to home position failed
91 Elevator movement to home position failed
92 Error during sled movement to rotation position
93 Error during rotation to home or far position
94 Sled movement to home sensor position failed
95 Sled movement to transport position failed
99 Error during rotation movement to rotation min position
A0 Movement to mail slot failed
A1 Sled movement to sensor failed
A2 Sled movement to rotation position failed
A3 Elevator movement to home position failed
A4 Error during rotation to far position
A5 Sled movement to mail slot position failed
A6 Error during elevator movement to position
A7 Error during mail slot detection
B0 EEPROM on robotics controller not accessible or error during r/w operation
B1 Save/restore configuration settings: not enough internal memory available
for creating the file and restoring the file respectively
B2 Save/restore configuration settings: restore buffer corrupted, checksum
calculation failed
B3 Save/restore configuration settings: data base field corrupted
B4 Save/restore configuration settings: invalid personality
B5 Save/restore configuration settings: invalid file
All libraries
81 Tape drive wake up failed
88 Error accessing slot status
90 Robotic load not reached tape present sensor
91 No activity after <Load> command
92 Timeout while loading tape
93 No activity after <Load> command
94 Timeout drive unload
95 Tape drive terminated unsuccessfully
96 Tape not ejected at robot unload