Overland Tandberg NEO S 1U, Service Manual

Page: 43 / 51

NEO S-Series Library Service Manual Event Codes and Acronyms
10400666-005 ©2015-20 Overland-Tandberg

43
Sub-error Codes Related to the Robotic
FB Drive logged out Retry operation; if not successful
contact technical support Drive probably defect
FC Internal SCSI command failed
with check condition Retry operation; if not successful
contact technical support Drive probably defect
FD Internal SCSI command
timeout Retry operation; if not successful
contact technical support Drive probably defect
Error
Code
Description User Action Critical Component Status
01 Mechanical initialization failure
02 Connection to slave robotic failed
03 Error motor initialization
04 Error during gripper close
05 Error slider home positioning
06 Error elevator home movement
07 Error during sled movement to rotation position
08 Error during rotation initialization, get range failed
09 Error elevator init
0A Error during rotation to far position
0B Error first sled init, move to sensor failed
0C Error during sled movement to rotation position
0D Error during rotation to drive position
0E Error slider init, get range failed
0F Error during slider forward movement
10 Error gripper init, get range failed
11 Error during slider home movement
12 Error during rotation to FAR position
13 Error sled init, move to sensor failed
14 Error during sled move – check shipping lock
20 Error Inventory scan
21 Error during gripper close
22 Error slider home movement
23 Error during move gripper to scan POS
24 Error reading bar code label
25 Error during move sled to scan position
26 Error during move elevator to scan position
27 Error during sled preposition movement
29 Error during closing gripper