10400934-001
©2020 Overland-Tandberg
4
LTO Tape Drive User’s Guide
Preface
•
Der Zugriff auf das Bandlaufwerk sollte nur Personal gewährt werden, das über eine
technische und Produktsicherheitsschulung verfügt.
•
Führen Sie keine Werkzeuge oder Körperteile in die Öffnungen des Laufwerkschachts
oder in andere Öffnungen eines im Betrieb befindlichen Systems ein.
General Warnings
To prevent damaging the system, be aware of the precautions you need to follow when setting
up the system or handling parts. A discharge of static electricity from a finger or other
conductor may damage system boards or other static-sensitive devices. This type of damage
may reduce the life expectancy of the device.
Preventing Electrostatic Damage
To prevent electrostatic damage, observe the following precautions:
•
Avoid hand contact by transporting and storing products in static-safe containers.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
workstations.
•
Place parts on a grounded surface before removing them from their containers.
•
Avoid touching pins, leads, or circuitry.
•
Always be properly grounded when touching a static-sensitive component or assembly.
See the next section.
Grounding Methods
There are several methods for grounding. Use one or more of the following methods when
handling or installing electrostatic-sensitive parts:
•
Use a wrist strap connected by a ground cord to a grounded workstation or computer
chassis. Wrist straps are flexible straps with a minimum of 1 megohm (±10 percent)
resistance in the ground cords. To provide proper ground, wear the strap snug against
the skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on
both feet when standing on conductive floors or dissipating floor mats.
•
Use conductive field service tools.
•
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized
reseller install the part. For more information on static electricity, or assistance with product
installation, contact your authorized reseller.
Product Warranty Cautions
The customer should only perform the service and repair actions on the tape drive components
as described in this document. Any other actions needed should only be performed by an
authorized service center.
Warranty becomes immediately void in the event of unauthorized repairs or modifications.
