10400455-002
©2008-14 Overland Storage, Inc.
226
SnapScale/RAINcloudOS 4.1 Administrator’s Guide
8 - Maintenance
If
Send a Test Email
is checked, when you save your changes, an email is sent to all configured
email recipients.
Email Address of
Sender:
Choose one:
• The default address (
cluster_name@domain
) where the
domain
is the DNS domain name. If there is no DNS domain
name, then the server’s IP address for Eth0 will be used
(
cluster_name@ipaddress
).
• Specify a specific sender.
Email Addresses of
Recipients
Enter the email addresses to receive the notifications. One
address is required but as many as four email addresses can be
entered.
Send Email
Notification
Check the boxes next to the events you wish to be notified about:
• Node shutdown/restart – The node shuts down or reboots due
to an automatic or manual process.
• Node hardware event – The internal temperature for a node
exceeds its maximum operating temperature or other hardware
problems.
• SnapScale system event – A change or error occurs that
impacts the entire cluster.
• Administrative operation event – A Data Import operation has
finished or experienced an error.
• Storage usage warning event – Storage space usage on a
volume reaches either the maximum utilization or the critical
utilization setting. See
SnapScale Properties on page 43.
Send a Test Email
To verify your settings, check Send a test email to listed email
addresses upon saving settings, then click OK.
Option
Description
