Overland Storage SnapScale Administrator'S Manual Download Page 192

Page: 192 / 290

10400455-002



192

SnapScale/RAINcloudOS 4.1 Administrator’s Guide

7 - System Monitoring

System Status

Use the

System Status

page (

Monitor > System Status

) to assess the hardware status and key

information of the cluster member nodes.

The following status fields are displayed for each node that is part of the SnapScale cluster.
Any critical messages are displayed in a

red

font.

Field

Description

Node Name

Name of the node. The default node name is Node

nnnnnnn

where

nnnnnnn

is your node number (for example,

Node1123578).

Node Model

Node model name/number.

OS Version

The version of RAINcloudOS currently loaded on the SnapScale
node.

Hardware

The node’s hardware platform ID.

Node Number

Number derived from the MAC address of the Ethernet 1 port,
used as part of the default node name.

BIOS

The BIOS version for the node.

Serial Number

Unique number assigned to the node.

JVM

The Java Virtual Machine version.

Uptime

The amount of time the node has been up (since the last
reboot) in “days:hours:minutes” format.

Memory

Amount of system RAM.

Summary of Contents for SnapScale



































































































































































































































































































Search results

Summary of Contents for SnapScale

Reviews:

Related manuals for SnapScale

Brands by name

Popular brands

Overland Storage SnapScale, Administrator'S Manual

Search results

Summary of Contents for SnapScale

Reviews:

Related manuals for SnapScale

Brands by name

Popular brands