background image

10400328-001 02/2011

©2011 Overland Storage, Inc.

 

W

 1-2

SnapServer GuardianOS 6.5 Setup Guide

Product Descriptions

Product Descriptions

SnapServers provide a cost-effective, low-maintenance network block and file sharing 
solution that supports simultaneous access by Windows, UNIX/Linux, Macintosh, 
HTTP/HTTPS, and FTP clients. All GuardianOS SnapServers come with one or two 
Gigabit Ethernet (GbE) ports, CA 

e

Trust Antivirus, and BakBone NetVault backup 

software preinstalled (subject to licensing on some platforms), and support for third 
party backup agents.

Model

Description

SnapServer 110

SnapServer 110 is a desktop file server, with one disk 
drive and four USB ports.

SnapServer 210

SnapServer 210 is a desktop file server, with two disk 
drives and four USB ports.

SnapServer 410

SnapServer 410 is a 1U departmental file server, with 
four redundant, hot-swappable ATA disk drives, and 
four USB ports

SnapServer 500/600 Series

SnapServer 520, 620, and 650 are 1U departmental 
file servers with: 
• 4 redundant, hot-swappable SATA disk drives (520 

and 620 models) or SAS disk drives (650 model).

• Dual power supplies (650 model) 
• Dual core (620 and 650 models)
• Dual processor (650 model)
• Expandable by attaching multiple Snap Expansion 

S50 expansion arrays (520, 620, and 650 models).

SnapServer N2000

The SnapServer N2000 is a 2U departmental file 
server with:
• 4 to 12 redundant hot-swappable SATA II or SAS 

disk drives

• Dual power supplies
• Quad  core  processor
• Expandable by attaching multiple SnapDisk E2000 

expansion arrays 

Summary of Contents for Snap Expansion S50
















































Reviews: