background image

10400328-001 02/2011

©2011 Overland Storage, Inc.

 

W

 5-5

SnapServer GuardianOS 6.5 Setup Guide

SnapServer 500/600 Series Specifications

Feature

Specification

Network Connection

Auto-sensing 10/100/1000Base-T, dual RJ-45 network connectors, 
with support for load-balancing and failover.

Dimensions

Width.....................17.5 in (444.5 mm)
Depth.....................28.07 in (713 mm)
Height....................1.75 in (44.45 mm), 1U
Weight...................40 lbs (18.5 kg)

Power

Power Rating: 400W, 100-240 VAC, 50-60Hz, 
Input Current: 3.4A (RMS) for 115VAC, 2.3A (RMS) for 230VAC
Power Consumption: 290W (steady state), 360W (maximum)
Heat Dissipation: 990 BTUs/hr.

Operating Environment

50° F to 95° F (10° C to 35° C)
20% to 80% humidity (noncondensing)
Vibration: 0.10G at 10-300Hz Random for 120 min. max duration
Shock: 6 pulses of 33G for up to 2ms
Altitude: 0 ft. to 10,000 ft. (0m to 3,048m)

Non-operating 
Environment

14° F to 149° F (-10° C to 65° C)
5% to 95% humidity (noncondensing)
Vibration: 2G at 5-500Hz for 90 min. max duration
Altitude: 0 ft. to 35,000 ft. (0m to 10,668m)

Regulatory Certifications

UL, cUL, CE, FCC Class A, TuV, NEMKO, C-Tick

Summary of Contents for Snap Expansion S50
















































Reviews: