10400328-001 02/2011
©2011 Overland Storage, Inc.
W
2-7
SnapServer GuardianOS 6.5 Setup Guide
SnapServer Hardware Checklists
SnapServer 110 Hardware Checklist
The checklist shows the required and optional hardware to install a SnapServer 110,
and indicates whether a component comes with the server or must be supplied by the
customer.
Component
Description
Network and
Power
;
Ethernet Cables (1 per enclosure)
Required to connect the Ethernet ports to the network.
;
External Power Supply and Cable to connect to server (1 per enclosure)
;
Power Cables (3 per enclosure)
Required to connect between the power supply and the mains (One US, one UK,
one EU.)
;
Power Cord Retainer Clip
Attaches to the server to hold the power cord in place.
Ethernet Switches
Use switches that support GbE.
APC-Brand UPS Devices (optional)
SnapServers are designed to work with a USB-based or network-based, APC-brand
UPS. Visit the
for a listing of optimal APC models.
Backup
• USB 2.0 Cable
To attach a tape device via USB, you need a USB 2.0 cable.
Note:
For a list of compatible backup solutions, see “SnapServer Backup
Solutions Feature Comparison Chart” on page 3.
USB-Connected Tape Backup Devices
For a list of compatible tape drives/libraries, see the appropriate backup software
vendor's supported tape device list.
Printer
USB 2.0 Cable
To attach a tape device via USB, you need a USB 2.0 cable.
USB-Connected Printer
