Overland Storage LXLS10, User & Installation Manual

Page: 46 / 90

3-12
u
Operation
S
ELECTING
C
ONTROL
P
ANEL
D
ISPLAY
M
ODES
Figure 3-13. Code Entry Submenu
Use the
p
and
q
buttons to set the first digit of the unlock code. Press the Enter button to
move the cursor to the second digit and repeat the process. When you have finished, press the
Escape button, then the Enter button to confirm your entry.
If the code is correct, the Main Menu displays. If the code is incorrect, an error screen displays.
Exiting the Menu Mode
To leave the menu mode and return to the Default Screen, press the Escape button repeatedly.
Each time you press the Escape button, the display moves to a higher menu level. When the
Main Menu is visible, pressing the Escape button once returns to the Default Screen.
Menu Structure Navigation
To select a submenu, scroll the
u
to the desired line using the
p
and
q
buttons. Press the Enter
button to confirm your choice and display the submenu.
The items available on the Main Menu are:
•
Load/Unload
•
Unlock Door
•
Show Status Menu
•
Maintenance Menu
•
Configure Menu
•
Show History Menu
•
Security Menu.
Load/Unload Menu
See “Loading and Unloading Cartridges” later in this chapter.
Unlock Door
When you scroll to Unlock Door and press the Enter button, the magazine door swings open. If
the “Magazine Locked” message appears on the screen, the host software has locked the
magazine. Usually, exiting your backup or host software releases the lock. If there is a host
failure, cycle power to the PowerLoader to release the lock.
hhhh
iiii
Unlock Code
Unlock Code Unlock Code
Unlock Code