Overland Storage LoaderXpress, User & Installation Manual

Page: 78 / 104

4-4 Maintenance
C
LEANING
C
ARTRIDGE
When you press the Enter button, the In Progress screen appears.
Figure 4–5 Cleaning In Progress Screen
When the cleaning operation is completed, the Default Screen reappears.
Removing the Cleaning Cartridge
1) Examine the Default Screen on the Control Panel to assure that the cleaning
cartridge has been unloaded from the drive. If not, then unload it using the
Load/Unload Menu, as described in
Chapter 3, “Operation”
.
2) Remove the magazine from the LoaderXpress using the procedure described in
Chapter 3 - Operation , Removing the Magazine .
3) Remove the cleaning cartridge from the magazine.
4) Insert any desired data cartridge into the slot vacated by the cleaning cartridge.
5) Insert the magazine into the LoaderXpress.
6) Close the magazine door.
Clean:
SDLT1
Use:
Slot1
Cleaning in Progress