Overland Storage LoaderXpress, User & Installation Manual

Page: 73 / 104

Operation 3-23
T
APE
R
EQUIREMENTS
I
NITIAL
S
CREEN
– T
O
L
INE
-
The list on line 4 (the To line) includes all of the valid
destination choices, that is, the drive if it is empty, or all slots that are empty. You can’t put
a cartridge into a slot or drive which already has one in it.
S
CROLL
L
IST
– T
O
L
INE
-
If you have selected the drive on the From screen, the To list can
include only slots. If you have selected a slot on the From screen, the To list can contain
only the drive.
If unloading the cartridge located in SDLT into slot 4 is desired, Press the Enter button to
select SDLT.
Figure 3–28 SDLT Load/Unload “From” Entry Screen
The cursor now moves to line 4, indicating you can select a destination:
Figure 3–29 SDLT Load/Unload “To” Entry Screen
From line 4, press the button. As soon as you press the button, three things happen:
•
The list scrolls down one item (only line 4 scrolls)
•
A appears on the right of line 1 of the display. This indicates that there is one
or more items above the item displayed on line 4. A indicates there is one or
more items below the item displayed on line 4.
•
The at the left of line 4 disappears. This is because the indicates the current
selection or the default selection, and you have scrolled the default selection off
screen, and haven’t yet selected an item from the list.
•
From line 4, press the button until Slot 4 appears and press the Enter button
to select it. The Confirmation Screen displays:
From :
SDLT1
To:
Slot 2
From :
To:
SDLT1