Overkill Solar 120A 4s 12V BMS, Instruction Manual

Page: 22 / 68

3.4.3 LED Enabled
Not applicable. Our BMS does not have the LED populated.
3.4.4 LED Capacity
Not applicable. Our BMS does not have the LED populated.
On BMS modules that have an LED, this would blink the capacity out (e.g., 5 blinks would mean 100%
capacity).
3.4.5 BMS Name
Not applicable; has no effect on the behavior of the BMS. However, if the PIN protect option is used within
the iPhone app, it will use the name as a PIN passcode, which could leave you locked out of your BMS. We
recommend to leave this alone, and to not use the iPhone app’s PIN protect function.
3.4.6 Barcode
Not applicable. This does not affect the operation of the BMS. We recommend to keep it at its default value.
3.4.7 NTC Settings
Leave these at their default setting.
12V BMS:
24V BMS: