BLENDER MAINTENANCE
WARNING
:
Always unplug the product from the electrical outlet before assembling, disassembling, or cleaning it.
If the product’s motor does not run freely while blending ingredients, perform one or more of the
following steps, as necessary:
a)
Press the OFF Button and add water to the ingredients
b)
Press the PULSE Button for a few minutes and the motor blends freely
c)
Press the OFF Button, unplug the blender from the electrical outlet and use a rubber spatula to clear the
sides of the blender jar and push the ingredients toward the Blades (rubber spatula not included).
d)
Reduce the amount of ingredients inside of the blender jar
Clean the product immediately after each use. Before cleaning and putting your hands and fingers
inside of the blender jar, remove the blender jar from the motor housing and the plastic lid, blades and
spin base from the plastic blender jar.
Use a small toothbrush (not included) to remove particles of food lodged underneath the blades.
Clean the exterior surface of the motor housing by wiping it with a soft, damp cloth.
Do not use abrasive cleaners or scouring pads to clean the product.
To clean the blender jar, add ¼ teaspoon of liquid soap to the blender jar and fill with warm water.
Place the blender jar on the motor housing and press the PULSE Button several times for a few seconds.
Remove the blender jar from the motor housing and rinse the blender jar underneath running water.
CAUTION:
Do not place the blender jar and the plastic lid into a dishwasher or extremely hot water.
Dry all product parts thoroughly before storing.
Store the product in a clean, dry place with the plastic lid removed from the blender jar.
ELECTRICAL REQUIREMENTS
Voltage
Frequency
Wattage
120 VAC
60 Hz
400 W
8
ovente.com
