11/98
3-1
U3-1021
Westinghouse Proprietary Class 2C
Section 3. Link Controller Initialization
3-1. Section Overview
This section describes the initialization of the Ovation Link Controller card.
3-2. Software Needed
The following programs are provided on floppy disks for the initialization of the LC
module through an external personal computer:
•
RLCFLASH.EXE (provided on disk RLC10A)
Backs up the Link Controller’s RAM disk to flash (non-volatile) memory.
•
RLCEXTPC.EXE (provided on disk RLC20A)
The external Personal Computer host program formats the LC’s RAM disk (if
needed), loads DOS (if needed) and copies any desired files to the Link
Controller RAM disk. Allows the LC to receive commands from the computer
and to write information to the PC’s CRT.
Note
It is assumed that the user is proficient in DOS.
(DOS 5.0 is the required version.)
