OV Solutions OVC-5bvir User Manual Download

Page: 56 / 70

Monday has not been colored in the schedule table, then no action will

be triggered even the camera detects motion during 11:00~12:00 on

Monday.

b. Record File

When an event happens, the IP camera can record a video clip or

take snapshot, and then send to mail/ FTP/ Samba. Select what format

you

want to save.

• AVI File (with Record Time Setting): Save AVI video file. The video

length is according to the value you set in Record Time Setting.

• JPEG File (Single File with Interval Setting): Save single JPEG picture

file when event happens.

• JPEG Files (with Record Time Setting): Only when you select "JPEG" in

streaming 1 video format of Video Setting, this option can be enabled.

Select this option to save several JPEG picture files, and the successive

picture files cover a period of time according to the value you set in

Record Time Setting.

c. Record Time Setting

When an event happens, the IP camera can record a video clip or take

snapshot, and then send to mail/ FTP/ Samba. Select the video recording

length before and after event happens.

• Diagram example of "Interval" and "Pre/ Post Alarm":

Summary of Contents for OVC-5bvir







































































Search results

Summary of Contents for OVC-5bvir

Reviews:

Related manuals for OVC-5bvir

Brands by name

Popular brands

OV Solutions OVC-5bvir, User Manual

Search results

Summary of Contents for OVC-5bvir

Reviews:

Related manuals for OVC-5bvir

Brands by name

Popular brands