User Manual of Network Fisheye Camera
63
5.6.3
Configuring Alarm Input
Steps:
1.
Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input:
2.
Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
Figure 5-40
Alarm Input Settings
3.
Click
Edit
to set the arming schedule for the alarm input. For details, refer to Step
5 in
Section 5.6.1.
4.
Check the checkbox to select the linkage method taken for the alarm input. For
details, refer to Step 6 in
Section 5.6.1.
5.
(Optional) You can copy your settings to other alarm inputs.
6.
Click
Save
to save the settings.
Note:
Alarm input settings vary according to the camera model.
5.6.4
Configuring Alarm Output
Steps:
1.
Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2.
Select one alarm output channel in the
Alarm Output drop-down list.
3.
(Optional) Input the alarm output name in the text field.
4.
The
Delay
time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
