User Manual of Network Fisheye Camera
61
Figure 5-38
Linkage Method
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an
event occurs.
Send Email
Send an email with alarm information to a user or users when an event occurs.
Note:
To send the Email when an event occurs, you need to refer to
Section
5.3.9
to set the related parameters.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
Note:
Set the FTP address and the remote FTP server first. Refer to
Section
5.3.11
for detailed information.
Trigger Channel
The video will be recorded when the motion is detected. You have to set the
recording schedule to realize this function. Please refer to
Section 6.2
for
detailed information.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note:
To trigger an alarm output when an event occurs, please refer to
Section
5.6.4
to set the related parameters.
5.6.2
Configuring Video Tampering Alarm
Purpose:
